Skip to content
Free shipping on all wall-mounted battery powered hoops
0
Adjustable Wall Mounted Hoop
Adjustable Wall Mounted Hoop
Adjustable Wall Mounted Hoop
Adjustable Wall Mounted Hoop
Adjustable Wall Mounted Hoop
Adjustable Wall Mounted Hoop
Adjustable Wall Mounted Hoop
Adjustable Wall Mounted Hoop
Adjustable Wall Mounted Hoop
Adjustable Wall Mounted Hoop
Adjustable Wall Mounted Hoop

Gladiator Pro Sports

Adjustable Wall Mounted Hoop

$1,899.00 $1,999.00
Bundle & Save 10% off both

Add a Custom Print Wall Pad to this hoop and take 10% off both items. No code to enter - it applies in your cart.

Custom Print Wall Pads
Custom Print Wall Pads
6-Panel Set (6' × 12') · $2,450.00
You save—
Bundle total—
Design your wall pad

Every pad is printed to your artwork, so you choose the design on the pad page. Add this hoop to your cart first and the 10% lands automatically once both are in.

18-8 stainless steel hardware — no rust, no seized bolts
Palletized freight shipping across the US
Direct support from the people who build it
Description

The most adjustable wall-mount hoop you can bolt to a wall. Choose the 36" overhang and crank the rim anywhere from 6 to 10 feet, or the 18" overhang for an 8-to-10-foot range that hugs the wall and maximizes court space.

  • 36" overhang adjusts 6–10 ft • 18" overhang adjusts 8–10 ft
  • 3/8" tempered-glass clear-view backboard — 54", 60", or 72"
  • Triple-spring heavy-duty side-flex rim with concealed netting
Full description & specs

The most adjustable wall-mount hoop you can bolt to a wall. Choose the 36" overhang and crank the rim anywhere from 6 to 10 feet, or the 18" overhang for an 8-to-10-foot range that hugs the wall and maximizes court space.

The removable hand crank sits out front with rotating grips — no fishing for an overhead crank pole. The 3/8" tempered-glass backboard has a clear-view design that keeps distracting steel out of your sightline, and the easy-read height indicator makes resets fast between players.

  • 36" overhang adjusts 6–10 ft • 18" overhang adjusts 8–10 ft
  • 3/8" tempered-glass clear-view backboard — 54", 60", or 72"
  • Triple-spring heavy-duty side-flex rim with concealed netting
  • Galvanized steel up to 1/4" gauge, black powder-coat finish
  • 18-8 stainless steel hardware throughout
  • Backboard pad included standard
  • Fewer bolts than competing systems — step-by-step install video included

Not sure which overhang fits your court?

Shipping & delivery

Hoops and flooring ship palletized freight. We confirm your delivery details after checkout and coordinate a delivery window with you. Accessories ship standard ground.

Installation

Wall backing comes first — wall-mount adjustable hoops only. The battery-powered and manual-crank adjustable wall-mounts, in both 18" and 36" overhang, bolt to a 28" steel wall plate that must land on proper backing: LVL filling 88" to 120" off the floor, rated for 1,000 lbs of downward force.

Open the interactive wall backing guide — it opens in a new tab with animated diagrams for every wall type, plus the wall plate dimensions.

Not sure what's behind your wall? Send us photos and we will confirm it for you before you order.

By the numbers

Built to adjust. Built to last.

The specs that matter on a wall-mount adjustable system — the range, the reach, and the parts that keep it true.

6'-10'
36" overhang range

The 36-inch overhang lowers all the way to 6 feet for young players and rises to regulation 10.

8'-10'
18" overhang range

The wall-hugging 18-inch overhang adjusts between 8 and 10 feet and maximizes court space.

No pole
Removable hand crank

The crank sits out front at chest height — no awkward overhead cranking. Pop it off to lock in your height.

3/8"
Tempered glass board

Clear-view 3/8-inch tempered glass with an aluminum edge frame — in 54", 60", and 72" sizes.

180°
Breakaway rim

Heavy-duty triple-spring flex rim deflects under load and snaps back true — protecting the glass and your wrists.

Anti-tear
Meridian rope netting

Safety rim and net connector with Meridian rope anti-tear rim netting keeps the net locked on through heavy play.

1/4"
Steel support arms

All components are galvanized steel finished with black powder-coat paint.

18-8
Stainless hardware

Every included bolt, nut, and washer is stainless steel.

Pre-padded
Backboard padding installed

Competition-grade padding is mounted to the board at our shop — it arrives already on, with nothing to assemble.

Interactive

Crank it. See it.

This is the WM-Series geometry in motion. Grab the hoop and pull it to any height, compare the 18-inch and 36-inch overhang footprints, and orbit the full assembly — this is the real linkage, actuator and all.

LOADING…
↕ Drag anywhere to adjust height
View
Drag hoopHeight Drag backgroundOrbit ScrollZoom 1–5Views
Interactive guide Not sure which hoop? Let us size it. Two measurements. One recommendation. Tap to open.

Your Setup

Width of wall hoop is mounting to 24 ft

The full width of the wall the hoop mounts to. This sets your backboard size.
12 ft50+ ft

Room length off the hoop wall 30 ft

How far the room runs out from the hoop — the length of the adjacent wall. This is your playing depth.
10 ft60+ ft

Where's it going?

The level of play shapes the backboard we recommend.

Backboard

Rim Height

Wall Offset

Why this hoop

    Built to last

    Forged from stainless steel.

    Every bolt, bracket, and fastener on a Gladiator hoop is 100% stainless steel — an alloy engineered to stay strong, stay clean, and hold its finish for the life of the court.

    Stainless steel hex bolt and nuts, studio macro photograph
    The material 304 / 316 grade
    Non-porous. Non-corrosive. Permanent.

    Corrosion resistant

    A self-healing chromium-oxide layer keeps rust from ever taking hold — no orange streaks, no pitting, no rust bleed onto your wall or floor.

    High tensile strength

    Holds torque and shrugs off the repeated shock of dunks and rim loads without fatigue — the hardware keeps its grip long after the game.

    Sleek, premium finish

    A clean satin-steel look that reads professional in any gym — the polished surface holds its shine instead of dulling, chipping, or flaking.

    Zero maintenance

    No painting, no sealing, no rust treatment — ever. A quick wipe is all it takes. Bolts back out clean years later without seizing or stripping.

    Hygienic & non-porous

    A sealed surface gives dirt, sweat, and bacteria nowhere to hide — ideal for schools, gyms, and any high-traffic indoor court.

    304 / 316 stainless grade Commercial-grade throughout Backed by warranty

    The breakaway rim

    See the rim do its job

    Hang on it. Dunk through it. The triple-spring side-flex rim deflects under load and snaps back to true — protecting the tempered glass and your wrists on every finish.

    Gladiator wall-mount adjustable hoop with backboard padding already installed

    Included, not upsold

    Backboard padding, already installed

    Every Gladiator wall-mount arrives with competition-grade padding already mounted to the bottom edge of the backboard — the exact spot players run into. No add-on, no upcharge, nothing for you to install.

    Mounted at the factoryFitted and secured to your board before it leaves our shop — nothing for you to assemble.
    Bottom-edge wrapDense closed-cell foam covers the full lower rail of the board.
    Weatherproof shellUV- and water-resistant cover holds its color outdoors for years.
    Installation Requirements

    Wall Backing Requirements

    Wall-mount adjustable hoops only

    This guide covers the wall-mount adjustable hoops only — battery-powered and manual crank, in 18" and 36" overhang. Pick your wall type below to see exactly what needs to be behind the bracket before install day.

    88"–120"Backing zone from floor
    3" MinLVL backing thickness
    16¾"Bracket width · 16" mounting holes
    1,000 lbsDownward force rating
    Floor 16" O.C. studs LVL fills every stud cavity in bracket area 120" 88" + +
    Fig. 1 — In-cavity LVL backing, framing stageTap + for details

    Sheetrock — Framing Stage

    Standard install

    Building or renovating? This is the cleanest option: your carpenter installs LVL backing inside the stud cavities, then sheetrock finishes over the top — invisible when done.

    • Locate wall center. Find the center of the wall the hoop is going on.
    • Fill 88" to 120" from the floor with LVL (laminated veneer lumber) — defect-free from knots, cracks, warping, or cuts.
    • Fill the cavity, 3" thick minimum. LVL fills the entire stud cavity front to back.
    • Horizontal & secured. All backing runs horizontally and is properly secured to a stud.
    • Cover the bracket footprint. The bracket is 16¾" wide with mounting holes 16" wide — back every stud cavity in that area.
    • 1,000 lb rating. Backing must withstand 1,000 lbs of downward force.
    • Ledge on the wall? Build a box up from the ledge to backing height so the bracket sits flush on the wall.
    Floor Studs behind sheetrock Stacked LVL — each board one continuous piece 120" 88" + +
    Fig. 2 — Surface-mounted stacked LVL, finished wallTap + for details

    Sheetrock — Finished Wall

    Standard install

    Room already finished with no backing behind the sheetrock? Mount the backing on top of the wall surface instead — LVL installed horizontally, anchored into studs.

    • Locate wall center. Find the center of the wall the hoop is going on.
    • Cover 88" to 120" from the floor with LVL (laminated veneer lumber), installed horizontally on the wall.
    • Continuous horizontal runs. Boards can stack vertically to fill the zone, but each horizontal run is a single continuous piece of LVL — no piecing boards end-to-end.
    • 3" thick minimum. Thick enough for the wall-plate anchors to fully engage.
    • Fasten into 3 studs. Cut the LVL long enough to hit at least 3 studs securely.
    • Cover the bracket footprint. Backing spans the full 16¾" bracket width — mounting holes are 16" wide.
    • 1,000 lb rating. Backing must withstand 1,000 lbs of downward force.
    Floor Solid concrete 8" solid, min Bracket zone 120" 88" +
    Fig. 3 — Solid concrete wallTap + for details

    Concrete Walls

    Standard install — if 8" solid

    Solid concrete is the strongest wall you can mount to. If it's solid, 8 inches thick, and tall enough, no additional backing is needed.

    • Solid concrete, 8" thick. Meets thickness with no voids. If under 8", consult a structural engineer.
    • Wall reaches full height. Concrete covers the entire 88"–120" backing zone. If it stops short, add proper backing above the concrete to reach spec.
    • 1,000 lb rating. Backing must withstand 1,000 lbs of downward force.
    Not sure your wall qualifies? A structural engineer can verify thickness and condition in a single site visit — cheap insurance for a permanent install.
    Floor Stacked 3" LVL + 2x12 vertical bracing Pad row 6'–6'6" Pad row 6"–10" 120" + + +
    Fig. 4 — Post-frame / shed wallTap + for details

    Post-Frame / Shed Walls

    Standard install — with bracing

    Shed and post-frame walls need horizontal LVL backing plus vertical bracing so long spans don't flex under the hoop's weight. Actual wall structure varies — treat this as the reference layout.

    • 3" thick LVL, horizontal. Fill the hoop backing area (up to 120" from the floor) with LVL running horizontally.
    • Continuous horizontal runs. Boards can stack vertically to fill the zone, but each horizontal run is a single continuous piece of LVL — no piecing boards end-to-end.
    • Brace vertically. 2x12 lumber behind the LVL, secured to the LVL and the shed's structural framing at 4 points per LVL section.
    • Cover the bracket footprint. The bracket is 16¾" wide with mounting holes 16" wide.
    • 1,000 lb rating. Backing must withstand 1,000 lbs of downward force.
    • Wall pad blocking — top row. 2x4 verticals every 2' across 12' of width, positioned 6'–6'6" from the floor.
    • Wall pad blocking — bottom row. Same 2x4 layout, positioned 6"–10" from the floor.
    Floor Engineer evaluation required before any install
    Fig. 5 — Hollow / cinderblock wall

    Cinderblock / Hollow Walls

    Structural engineer required

    Hollow-core block behaves very differently under load than solid concrete or framed lumber. Consult a structural engineer before installing any portion of this product on a hollow or cinderblock wall.

    • Engineer evaluation first. A structural engineer assesses the wall and specifies an approved mounting method before any part of the install.
    • Same load standard applies. Whatever method the engineer specifies must still meet the 1,000 lb downward force rating.
    Why the hard line? Hollow cores can't be verified from the surface, and anchor pull-out in block is unpredictable. An engineer determines how to safely reach the required rating.
    Steel wall plate — front view 28" 4" 16" hole spacing 18" overall +
    Fig. 6 — Wall plate, front viewTap + for details

    Wall Plate Dimensions

    Wall-mount adjustable hoops only

    Both wall-mount adjustable hoops — battery-powered and manual crank, in 18" and 36" overhang — hang from this steel wall plate. The backing zone exists to give every one of these bolts something solid to bite into.

    • 28" tall. The plate stands 28" — the 88"–120" backing zone gives you margin to set mounting height.
    • 18" overall width. Outside edge to outside edge across both uprights.
    • 16" hole spacing. The two bolt columns sit 16" apart — on 16" O.C. framing they land on adjacent studs.
    • Holes on 4" centers. 7 mounting holes per upright, 14 total.
    • Full plate on backing. The entire plate footprint must land on the LVL backing zone — never partially on bare sheetrock.
    • 1,000 lb rating. Backing behind the plate must withstand 1,000 lbs of downward force.

    Questions about your wall? Call us at 651-269-5950 — send a photo of your wall and we'll help you spec it.